Xbox 360 Red Ring of Death – Step by Step Repair Guide

When the warranty for your Xbox 360 has expired and you don’t want to spend a whole lot to get it fixed, then the solution is to repair your game console on your own.  With the help of this step by step repair guide, you will be able to fix your Xbox 360 red ring of death problem without having to shell out a single cent.  The reason why this is such a great repair plan is because whenever your console breaks down, you can fix it all on your own.

Step 1: Take apart Xbox case with using a fine tip screwdriver to poke on the small rectangular holes at the back.  This will help you remove the faceplate and as you get it out, move up the latch on the DVD drive.  Once off, unscrew the metal case which is under the plastic case.  

Step 2: Now you need to remove the motherboard which begins with unplugging all cables connected to it.  Remove the DVD drive followed by the fan and motherboard which has to be done gently.  To disassemble the motherboard, turn it over and take out the X-clamp with the use of the screwdriver, this is located under the heat sink and also has to be done very gently.

Step 3: Next step is to unscrew the heat sink where the CPU (central processing unit) and GPU (graphic processing unit) is located.  Do this step slowly as you have to be very careful not to damage your Xbox.  Once you have obtained the CPU and GPU, you need to clean these units with a small piece of cloth which will be an advantage in preventing the Xbox from freezing.  This step is vital and critical which is why doing it properly is necessary.

Step 4: You will have to purchase a bottle of arctic silver compound which you can obtain from any computer hardware store for about a dollar or two.  This last step is where you will need to apply this arctic silver compound over the GPU.  Set it aside for about 20 minutes then apply 2 nylon washers on the screws of the heat sink.  Return the screws on the motherboard as well and put 2 more nylon washers on these.  Put the heat sink at the peak of the screws then press down slightly and screw them up as tight as you can.  Put everything back together properly then you can turn on your Xbox 360 and resume playing.

If you encounter the Xbox 360 red ring of death problem, not to worry because you can actually repair it on your own.  If this guide isn’t clear enough, simply search online as there are a lot of affordable, easy to follow manuals that are in video form which will definitely help you fix your console.